Location
Phone

+91 9987582130 / 9867013021

Multi Stage Ultrasonic Vapour Degreasing System

Multi Stage Ultrasonic Vapour Degreasing System

Oscar Ultrasonic Vapour Degreasing System enhances cleaning speed and effectiveness where high degree of cleaning is required. These systems save energy, labour, floor space, consumables and hence most cost effective.

How does it work ?

The components are first cleaned in precleaning chamber for removal of gross contaminates, followed by vigorous ultrasonic agitation. Then the components are held in vapour chamber for vapour condensation to remove the residual contamination.

As the components reach the vapour temperature the condensation stops and components come out clean and dry. For efficient solvent recovery, water is circulated in the condensing coils. The system comprises of two, three or four chambers depending upon the level of contamination and degree of cleaning required. Units are also available with direct refrigeration cooling systems, distillation plants, filtration plants and fume extraction systems.

Multi Stage Ultrasonic Vapour Degreasing System

Oscar Ultrasonic Vapour Degreasing Systems come with elegantly painted, compact, portable cabinets and are ideal for following applications :

GENERAL INDUSTRIES :

Tools, dies, moulds, castings, gear, mechanism, pumps, bearings, spray guns, vacuum valves, fire extinguishers, cutlery, scissors, silverware, brassware. LPG valves & components etc.

ELECTRONICS :

Semiconductor components, PCB's, Electronic assemblies, Capacitors, Rotary Switches, Resistors, Electronic Microscope Components, Cathod Ray Tube Components, Solar Cells.

ELECTRICALS :

Motors, Generators, Supply Meters, Voltmeters, Ammeters, Switches, Thermostats, Switch Gears, Vacuum Interrupters, Circuit Breakers, etc.

AIRCRAFT :

Bearings, Pumps, Filters, Hydraulic Components, Altimeters, Anemometers, Gyroscopes.

AUTOMOTIVE :

Fuel Injectors, Spark Plugs (Carburetors), Pistons, Valves, Bearings, Filters, Engine Blocks, Shock Absorbers.

TECHNICAL SPECIFICATIONS FOR 2 CHAMBER VAPOUR DEGREASING SYSTEM
    UVD / 2/ 250 UVD / 2/ 500 UVD / 2/ 750 UVD / 2/ 1000
Chamber Dimensions Effective (mm) U/S Chamber 300 x 250 x 125 400 x 300 x 200 500 x 350 x 200 600 x 400 x 300
Vapour Chamber 300 x 250 x 125 400 x 300 x 200 500 x 350 x 200 600 x 400 x 300

Overall / Outer
Dimensions (mm)

  900 x 550 x 950 1550 x 620 x 1100 1750 x 620 x 1100 1750 x 700 x 1400
Total Solvent Cap. (Lit)   18 48 70 144
U/s Power Output   250 W 500 W 750 W 1000 W
Input Voltage 230 V, 1 Ph / 50 Hz OR 415 V, 3 Ph 50 Hz with four wires

    UVD / 3/ 250 UVD / 3/ 500 UVD / 3/ 750 UVD / 3/ 1000
Chamber Dimensions Effective (mm) Pre. Cleaning Ch. 300 x 250 x 125 400 x 300 x 200 500 x 350 x 200 600 x 400 x 300
U/S Chamber 300 x 250 x 125 400 x 300 x 200 500 x 350 x 200 600 x 400 x 300
Vapour Chamber 300 x 250 x 125 400 x 300 x 200 500 x 350 x 200 600 x 400 x 300

Overall / Outer
Dimensions (mm)

  1300 x 550 x 975 2050 x 620 x 1125 2350 x 670 x 1125 2650 x 700 x 1400
Total Solvent Cap. (Lit)   27 72 105 216
U/s Power Output   250 W 500 W 750 W 1000 W
Input Voltage 440 V, 3 Ph / 50 Hz with four wires

Ultrasonic Vapour Degreasing System
 
Request A Quote